Previous
Next
Autel MaxiScope MP408
Channel Automotive Oscilloscope for Laptop or Maxisys
The Autel MaxiScope MP408 is a PC based 4-channel automotive oscilloscope.
It works in combination with your PC or MaxiSys Tablet, which turns into a powerful diagnostic tool, providing you with an insight into the inner workings of a vehicle’s electronic circuits.
Description
Videos
Specifications
Accessories
Downloads
Comparison
Description
Featuring the user-friendly UI design combined with the unrivaled hardware specs, the MP408 system is able to measure and test virtually all the electrical and electronic components and circuits in any modern vehicles. Power for the MaxiScope MP408 Module comes directly from the USB port of the connected PC, making the system very versatile and portable to use.
The MP408 system is able to measure and test virtually all the electrical and electronic components and circuits in any modern vehicles.
Power for the MaxiScope MP408 Module comes directly from the USB port of the connected PC, making the system very versatile and portable to use.
MP408 can work with the following tools: IM608, IM508, MS906BT, MS906TS, MaxiSYS, MaxiSYS PRO, MaxiSYS Elite, and Maxisys mini.
Features
- Features one-click auto-setup of voltage scale and time base
- Works on all makes and models of modern vehicles
- Compatible with LIN, CAN, and FlexRay data bus standards
- Reads and displays electrical signals in high-resolution waveforms
- Allows manual editing of measurement parameter display
- Records and plays back waveform data
- Features color-coded 4-channel control panel
- Intuitive UI design features easy trigger point adjustment and real time scale info display
- Direct power supply through a USB connection
- Free online software update through the Internet
- Portable design with strong housing and protective rubber boot
Videos
Specifications
| Autel MaxiScope MP408 4 Channel Automotive Oscilloscope | |
| Vertical resolution | 12 bits |
| Channels | 4 |
| Bandwidth | 20MHz |
| Accuracy | 1% |
| Sensitivity | 10mV/div to 20V/div |
| PC Interface | USB 2.0 – Cable supplied |
| Power Requirements | Powered from the USB port |
| Input Ranges (full scale) | ±v50mV to ±100V in 11 ranges |
| Input Impedance | 1MΩ in parallel with 22pF |
| Input Type | Single-ended, BNC connector |
| Input Coupling | Software selectable AC/DC |
| Overload Protection | ±200V on a single input |
| Buffer Memory | 32M samples shared among active channels |
| Waveform Buffer | Up to 1000 waveforms |
| Timebase Ranges | 100ns/div to 1000s/div |
| Operating Temperature Range | 0°C to 50°C (15°C to 40°C for quoted accuracy) |
| Storage Temperature Range | 20°C to +60°C |
| Storage Humidity Range | 5% to 95%RH, Non-condensing |
| -1 or 2 channels in use | 80MS/s |
| -3 or 4 channels in use | 20MS/s |
Accessories
Downloads
Autel MaxiScope MP408 Oscilloscope User Manual
↓ Download PDF
Comparison
