Autel Oscilloscope Accessories
For Maxisys Ultra, MS919 & MP408
When measuring AC or DC with the current clamp, you can connect it with a multimeter or an oscilloscope to directly read the current value without the need to make physical contact with the conductor or to disconnect it for the insertion through the probe. The current clamp measures a maximum current of 650A, with a frequency up to 400Hz.
Description
Videos
Specifications
Accessories
Downloads
Comparison
Description
Features
- System Accuracy: The precision of the current clamp adds to that of the digital multimeter or oscilloscope. eg. The conductor carries 1A current, the current clamp is set to 1mV/100mA and the output is 10mV. If the precision is 1.5%, the output is between 9.85mV and 10.15mV.
- If the digital multimeter or oscilloscope connected with current clamp is set to 200mV and the precision is 0.5%, the reading is between 9.8mV and 10.20mV. (10.15mVx(1+0.5%)=10.20mV, 9.85mVx(1-0.5%)=9.80mV)
Videos
Specifications
Autel Oscilloscope Accessories | |
| Conductor diameter | 30mm maximum |
| Low Battery Indicator | Red LED |
| Operating Temperature | 0°C to 50°C, 70% R.H |
| Storage Temperature | -20°C -+70°C, 80% R.H |
| Battery Type | 9V DV, NEDA 1604, 6F22, 006P |
| Battery Life | 100 hours typical with carbon-zinc |
| Weigh | 250grams |
| Dimensions | 195 mm (H) x 70MM (W) X 33mm (D) |
| Output | Through a BNC connector |
Accessories
Downloads
Comparison
